The indoor broadband on-frequency active repeaters are used for retransmitting or redirecting microwave signals to receive sites that do not have direct line of site to the originating transmit site. The high power output of the indoor repeater can significantly extend the reach of an overall microwave system, while establishing an intermediate point from which microwave paths to multiple receive sites can originate.The Automatic Level Control circuit (ALC) maintains the desired output level during most input signal fading conditions.
| General Specifications | |||
| Input Frequency | 12.7 - 13.2 GHz | ||
| Output Frequency | 12.7 - 13.2 GHz | ||
| Gain Flatness | ±1 dB | ||
| Output Connector | WR 75 Waveguide | ||
| Input Connector | WR 75 Waveguide | ||
| Temperature Range | -40ºF to 100ºF | ||
| Humidity | to 95% | ||
| Dimensions | 20.5” wide x 6” open rack | ||
| Power | 120VAC | ||
| Features | |||
|
Compact outdoor housing. Tower mountable 80 channel capability Field upgradable Transmit monitor for maintenance of signal quality Automatic Level Control (ALC) circuit for constant output level (COT, MCOT, HCOT) | |||
| Options | |||
|
Custom waveguide design 230 VAC Input/Output frequency 12.1 - 12.5 GHz 12.4 - 12.7 GHz | |||
